- Home
- Equipment
Refine by
Hilliard Energy Equipment & Supplies
51 equipment items found
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to easily pre-sets the torque. Similar static and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO manufactures complete fuel filtration systems which can incorporate all or any combination of these contaminate removal techniques. Put HILCO's expertise to work in solving your most difficult liquid fuel filtration ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The patented Hilliard Extreme Duty Centrifugal Clutch has been engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the integrity of the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard offers a Continuously Variable Transmission that is more advanced than any other belt drive system currently on the market. The Hilliard clutch system utilizes a tight belt which allows for seamless engine braking and belt protection at start up and during overload situations, to extend belt life. Hilliard's CVT system is designed to fit a wide variety of clutch envelopes, so no ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard's Centrifugal Refrigeration Clutches are built for use in transport refrigeration systems including trucks, trailers, rail units, and cold chain applications. Designed for both OEM and aftermarket use, they support a wide range of compressor and drivetrain setups. These clutches feature automatic and gradual engagement, shock-absorbing performance, and torque-limiting capability for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Extreme Duty Pulley Centrifugal Clutch is ideal for retrofit or new equipment application. The clutch was designed to be a low-cost upgrade to the current low-priced centrifugal market and is ideal for the everyday demands of chipper, shredders, power trowels, concrete mixers, power screeds, air compressors, lawn and garden equipment and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. HILCO has been manufacturing coalescers for liquid fuels for over twenty-five years. Systems are available with flow capacities as high as 1500 GPM (5700 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard centrifugal clutch provides automatic, gradual, cushioned engagement over a speed range on high-inertia loads. It smooths out and reduces starting current surge. Centrifugal clutches are slip-free at rated load and speed. They protect against overload by limiting torque, absorbing shock and eliminating torsional resonance. Hilliard centrifugal clutches have soft transmission of power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Six-Port Standard Transfer Valves provide precise, multi-path fluid routing in industrial systems. Available in same-side or opposite-side six-port layouts, they employ spring- and pressure-loaded sealing pads (not plugs) for tight leak control. Built from heavy-wall steel or stainless tubing for durability, they offer low torque, low pressure drop, and simple top/bottom ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Fuel Gas Strainers are custom-engineered duplex or simplex basket strainers built from wrought materials—not castings—for superior flexibility and serviceability. Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power generation, and oil & gas ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Front Drive System is an electro-mechanically activated bidirectional overrunning clutch. When 12 volts of power are sent via the 4WD switch, the unit is activated to engage both front wheels instantaneously, whenever the rear wheels lose traction. The clutch also releases or overruns automatically the instant the rear wheels regain traction. Because torque is transmitted to both ...